Hilltip HT 45 SprayStriker™ Mist Cannon

HT 45 SprayStriker™ Mist Cannon for Dust Suppression and air pollution control

DUST SUPPRESSION CANNON

HT45 SprayStriker™ mist cannon is a high-performance water mist cannon used to control dust, odour, disinfect, and regulate air pollution in various applications.

Our HT45 SprayStriker™ comes equipped with a sturdy, hot-dip galvanised frame, which is built to last and is suitable for heavy-duty applications such as mining, crushing, demolition, recycling, rental, and cement industry.

Features such as electric tilt, automatic main valve, and remote control are standard. Automatic oscillation up to 360°, which distributes water mist over large areas, is also common. The HT 45 is connected to a standard 32 A socket. The device can be powered by either 400 V/50 Hz or 480 V/60 Hz, drawing from the national grid or an alternative generator source.

The onboard control system includes a function to minimise power usage during start-up, which is provided as a standard feature. The flow rate can be adjusted to fit various applications. The dust control misting system droplet size ranges between 20 to 200 microns, depending on the nozzle size, thus making the HT 45 suitable for different applications.

STANDARD FEATURES

  • Wireless remote control and Electric tilt
  • Booster pump with run dry protection
  • Filter system 300 micron
  • Power peak override at generator operation
  • Water drain valve
  • Automatic oscillation system
  • Chassis with heavy duty fork pockets
  • Electric water main valve
  • Adjustable water flow

OPTIONAL FEATURES

  • Dosing pump for additives with 60 l solution tank
  • Misting system:
    • Nozzles 5-30 micron droplets
    • Additional filter system
  • Wheel-set with three road wheels

TECHNICAL SPECIFICATIONS

Sprayer specifications and dimensions

ModelHT 45
Voltage/Frequency400VAC/50Hz or 480VAC/60 Hz
Current consumption19 Amps (27 Amps @ 480VAC/60H z)
Fan motor power7,5 kW (11 kW @ 480VAC/60H z )
Pump motor power2,2 kW (3 kW @ 480VAC/60H z)
Power connector32 A- 5 pin
Effective throw range35 - 45 m
Area covered6 350 m²
Water flow12 - 60 LPM
Water connectionThread1 ” BSP (DN25 )
Required in pressure2 - 12 bar (min flow of 60 LPM )
Water qualityPortable / Filtered
Tilt angle-10 / +50 ˚
Auto oscillation10 ˚ to 360 ˚ in steps of 10˚
Operating temp+1°C to +50° C
Length with fork stand1 190 mm
Width with fork stand1 000 mm
Height with fork stand2 250 mm
Weight415 kg

TRAINING AND ARTICLES

Get more out of your spreader by reading related articles and manuals