Our IceStriker™ 12V electric salt and sand spreader is built to meet the requirements of the European pickup and light truck segment. The lightweight poly hopper body made of HD polyethylene, and mounted parts in stainless steel, provides you long lasting protection against corrosion and rust. The IceStriker™ combi salt spreader and controller system helps you save money and reduces the impact on the environment, while achieving the same de-icing results as before.
The salt spreader can easily be transformed into a complete brine solution sprayer or into a pre-wet combi salt spreader that moistens the spreading material. Integrated tanks in the double walled poly hopper body holds up to 450 l of liquid. The combi salt spreader can optionally be equipped with a 2 meter spray bar or a hose reel with hand-held spray nozzle.
This spreader is compatible with our optional HTrack™ tracking software. You can track and manage all of your spreading devices and snowplows online on your computer, tablet or smartphone. The program shows treatment route and spreading details on the map in real-time or between specific time intervals. Spreading route details such as speed, GPS location and material used can be summarized and generated as PDF reports.
The controller lets you customize your spreading session according to your current situation. Automatic GPS-speedcontrol adjusts the amount of spreading material (g/m2) according to your vehicle speed, while manual mode lets you insert a fixed auger speed. The controller additionally collects and saves essential data to an USB memory, allowing you to generate spreading reports. The controller also makes it easy to turn on functions, like vibrator, beacon and work light, from inside the cabin.
Stainless steel flip-up chute, designed for spreading salt with high humidity
Inverted-V helps reduce heavy start-up loads on the auger. All in stainless steel.
Vibrator prevents bridging and de-icing material from clogging by shaking the inverted Vee.
The 65 mm stainless steel auger gives you an even flow of material to the spinner.
Two-piece tarp mechanism, prevents spill off into truck bed when filling the spreader.
Top screen prevents rocks and big material chunks from getting into the hopper.
Built-in salt liquid level check for optional liquid system, which also includes an electronic sensor.
Pre-wet salt liquid kit, nozzles, pump with built-in tanks in spreader construction
2m wide spraybar with 2-5m spraying width
12m hose reel for spraying hard-to-reach areas with saltsolutions in winter, and for green area maintenance in the summer
Bladder tank stores additional liquid inside hopper
To increase visibility and keep you safe in the traffic
Adjustable work light at the rear of the spreader improves visibility
For practical storing and easier removal and installation
Online data-logging transfer via controller
Spreader specifications and dimensions
|Overall Width A||120 cm||120 cm||120 cm||120 cm|
|Width B||90 cm||90 cm||90 cm||90 cm|
|Minimum truck bed length C||120 cm||120 cm||170 cm||170 cm|
|Height D||92 cm||107 cm||92 cm||107 cm|
|Capacity, struck||500 l||700 l||750 l||1000 l|
|Capacity, rounded||630 l||780 l||880 l||1100 l|
|Weight empty||145 kg||170 kg||190 kg||215 kg|
|Spreading width||1-8 m (may vary depending on material)|
|Spinner size||390 mm||390 mm||390 mm||390 mm|
|Auger diameter||65 mm||65 mm||65 mm||65 mm|
|Material||Salt, sand, granulat/mixed (max 8mm ∅)|
LIQUID SYSTEM (optional)
|Pre-wet, Spray volume||3-12 l/min||3-12 l/min||3-12 l/min||3-12 l/min|
|Spraybar, Spray volume||5-25 l/min||5-25 l/min||5-25 l/min||5-25 l/min|
|Pre-wet, Spraying width||1-8 m (together with spreading material)|
|Spraybar, Spraying width||2-5 m||2-5 m||2-5 m||2-5 m|
|Pre-wet, liquid tank capacity||330 l||330 l||450 l||450 l|
|Spraybar, liquid tank capacity||330 l / 900 l *||330 l / 900 l *||450 l / 1200 l *||450 l / 1200 l *|
|Spraying material||Anti- and de-icing liquids, water, liquid fertilizers **|
See how much you can save by reducing material costs with a liquid system
kg / year *
€ / kg *
Get more out of your spreader by reading related articles and manuals