HillTip IceStriker™ Pickup Sand & salt spreader

IceStriker™ 550, 850 & 1100 Spreader for pickups and light trucks

COMBI SPREADER DESIGN

Our IceStriker™ 12V electric salt and sand spreader is built to meet the requirements of the European pickup and light truck segment. The lightweight hopper body made of polyethylene, and mounted parts in stainless steel, provides you long lasting protection against corrosion and rust. This unique salt spreader includes integrated tanks for the optional liquid de-icing system.

LIQUID DE-ICING FUNCTIONS

The salt spreader can easily be transformed into a complete brine solution sprayer or into a pre-wet combi spreader that moistens the spreading material. Integrated tanks in the double walled hopper body holds up to 450 l of liquid. The spreader can optionally be equipped with a 2 meter spray bar or a hose reel with hand-held spray nozzle. The IceStriker™ spreader and controller system helps you save money and reduces the impact on the environment, while achieving the same de-icing results as before.

HTrack Salt Spreader tracking system

OPTIONAL TRACKING SYSTEM

This spreader is compatible with our optional HTrack™ tracking software. You can track and manage all of your spreading devices and snowplows online on your computer, tablet or smartphone. The program shows treatment route and spreading details on the map in real-time or between specific time intervals. Spreading route details such as speed, GPS location and material used can be summarized and generated as PDF reports.

Read more

You can reduce the salt usage with up to 30% with the optional liquid pre-wet system, and by 75% when using salt brine solution as de-icing method! This is direct savings for you and the environment.

FUNCTIONS AND ACCESSORIES


Spreader controller

COLOR SCREEN CONTROLLER

The controller lets you customize your spreading session according to your current situation. Automatic GPS-speedcontrol adjusts the amount of spreading material (g/m2) according to your vehicle speed, while manual mode lets you insert a fixed auger speed. The controller additionally collects and saves essential data to an USB memory, allowing you to generate spreading reports. The controller also makes it easy to turn on functions, like vibrator, beacon and work light, from inside the cabin.

IceStriker spreader chute

FLIP UP CHUTE

Stainless steel flip-up chute, designed for spreading salt with high humidity

Flip-up chute for salt spreaders

INVERTED V

Inverted-V helps reduce heavy start-up loads on the auger. All in stainless steel.

IceStriker spreader vibrator

VIBRATOR

Vibrator prevents bridging and de-icing material from clogging by shaking the inverted Vee.

IceStriker spreader auger

AUGER

The 65 mm stainless steel auger gives you an even flow of material to the spinner.

IceStriker spreader tarp mechanism

TARP MECHANISM

Two-piece tarp mechanism, prevents spill off into truck bed when filling the spreader.

IceStriker spreader top screen

TOP SCREEN

Top screen prevents rocks and big material chunks from getting into the hopper.

IceStriker spreader liquid level

LIQUID LEVEL INDICATOR

Built-in salt liquid level check for optional liquid system, which also includes an electronic sensor.

ALSO INCLUDES

  • Built-in tie-down loops for strapping unit to truck
  • Hopper body includes molded alternate license plate area
  • The motor is mounted inside a sealed weather-resistant enclosure, and requires no pulleys, sprockets, belts or chains
  • Includes an accessory wire for optional work light, beacon light and rear camera that can be activated from the standard controller

IceStriker spreader liquid tanks

PRE-WET SALT KIT

Pre-wet salt liquid kit, nozzles, pump with built-in tanks in spreader construction

IceStriker spreader spraybar

SPRAY BAR

2m wide spraybar with 2-5m spraying width

IceStriker spreader hose reel

MANUAL HOSE REEL

12m hose reel for spraying hard-to-reach areas with saltsolutions in winter, and for green area maintenance in the summer

IceStriker spreader bladder tank

BLADDER TANK

Bladder tank stores additional liquid inside hopper

IceStriker spreader warning light

BEACON WARNING LIGHT

To increase visibility and keep you safe in the traffic

IceStriker spreader work light

LED WORK LIGHT

Adjustable work light at the rear of the spreader improves visibility

IceStriker spreader leg stand

LEG STAND

For practical storing and easier removal and installation

IceStriker spreader data-logging

ONLINE DATA-LOGGING

Online data-logging transfer via controller

OTHER OPTIONS

  • Rear-view camera
  • License plate kit

TECHNICAL SPECIFICATIONS

Spreader specifications and dimensions

SPREADER SPECIFICATIONS

MODEL5508501100
Overall width120 cm120 cm120 cm
Width90 cm90 cm90 cm
Minimum truck bed length120 cm170 cm170 cm
Height92 cm92 cm107 cm
Capacity (water level)500 l710 l1000 l
Capacity (rounded)630 l880 l1100 l
Weight (empty)145 kg190 kg215 kg
Hopper constructionPolyPolyPoly
Spreading width1-8 m (may vary depending on material)
Spinner size390 mm390 mm390 mm
Auger diameter65 mm65 mm65 mm
Vibrator
GPS speedcontrol
Manual speedcontrol
VehiclePick-ups, UTVPick-ups, trucksMin. 3,5 t trucks
MaterialSalt, sand, granulat/mixed

LIQUID SYSTEM (optional)

MODEL5508501100
Pre-wet, Spray volume3-12 l/min3-12 l/min3-12 l/min
Spraybar, Spray volume5-25 l/min5-25 l/min5-25 l/min
Pre-wet, Spraying width1-8 m (together with spreading material)
Spraybar, Spraying width2-5 m2-5 m2-5 m
Pre-wet, liquid tank capacity330 l450 l450 l
Spraybar, liquid tank capacity330 l / 900 l *450 l / 1200 l *450 l / 1200 l *
Spraying materialAnti- and de-icing liquids, water, liquid fertilizers **
* With optional patented bladder tank inside for spray bar system
** Do not use flammable or petroleum liquids for the liquid system

OPTIONAL LIQUID SYSTEM SAVINGS CALCULATOR

See how much you can save by reducing material costs with this spreader

Current de-icing method


Compare with


Salt consumption

kg/year*

Salt price

€/kg*

You can save in material costs annually

*Calculations based on the following application rates: Dry salt 30g/m2, Pre-Wet 17g/m2, Brine 35ml/m2. With a Pre-Wet system the application rate is significantly lower, as the pre-wetted salt bonds to the ground and immediately start breaking up the ice.

TRAINING AND ARTICLES

Get more out of your spreader by reading related articles and manuals